Sloan TRF 8036-N Installation Instructions

TRUFLUSH ELECTRONIC DUAL FLUSH FLUSHOMETERS
TruFlush Model:
PRIOR TO INSTALLATION
his valve is designed for new construction or where there is easily
T
accessed plumbing for the fixture and the valve.
This valve is designed for minimum six inch (152 mm) wall space
depth. Distance from center of the valve (inlet or outlet pipe) to the
finished surface of the wall can vary from 2"-3" (51-76 mm).
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdriver
ITEMS INCLUDED WITH THE PRODUCT
VALVE BOX
1. Wall Box and Electronic Valve Assembly
2. Mud Guard
3. Adjustment Tool
4. (2) #8-32 x 2" screws to secure mud guard
5. (2) 1/4"-20 x 2" screws to remove activation
assembly
6. Installation instructions
INSTALLATION INSTRUCTIONS FOR
Sloan® India Private Limited - Limited Warranty Summary
Sloan India Private Limited ("Sloan"), warrants its products against defects in materials and workmanship,
TRF 8036-N
excluding damage caused by matters beyond Sloan's reasonable control. Instructions for filing claims can be
TRF 8024-N
found in the Limited Warranty which can be obtained at https://www.sloan.com/company/international/sloan-
india or by requesting a free copy by telephone to Sloan India toll free number 1 800 123 3080 or via Mobile:
+91 729 005 0961 or via Landline : +91 124 601 3333. Sloan will repair or replace your defective product, or
provide a refund, as your exclusive remedy.
This is only a general summary of Sloan's Limited Warranty so it is important to note that the specific terms,
conditions, limitations and exclusions, including the duration of warranty coverage for your particular Sloan
product, are contained in the actual Sloan Limited Warranty. The Limited Warranty is subject to applicable
laws in your country, state, province or other jurisdiction—and disputes arising under the Limited Warranty are
to be resolved by binding arbitration unless you provide Sloan with an opt-out notice no later than 30 days
after your purchase date. In case of a conflict with this summary, the terms and conditions set forth in the
complete Limited Warranty will prevail.
ITEM #1: WALL BOX AND
ELECTRONIC VALVE
ASSEMBLY
• Adjusting tool (supplied)
1. Wall box and electronic
Valve Asembly
ITEM #1: WALL BOX
ITEM #1: WALL BOX ITEM #2: WALL PLATE
Wall plate opening must be of 5.6" x 5.6" (142 x 142 mm). Mud plate
is provided and must accompany valve for proper installation. Mud
plate is removed after wall is finished.
ITEM #1: WALL BOX AND
ELECTRONIC VALVE
ASSEMBLY
SENSOR VALVE BOX
ITEM #2: MUD GUARD
• Water Level
3. Adjustment Tool
2. Mud Guard
ITEM #2: WALL PLATE
WALL PLATE BOX
ITEM #3: SENSOR ASSEMBLY
SENSOR VALVE BOX
ITEM #3: ACTIVATION
ITEM #2: MUD GUARD ASSEMBLY TOOL
ITEM #3: ACTIVATION ITEM #4: #8-32 X 2" TRUSS ITEM #5: 1/4-20 X 2"
ASSEMBLY TOOL HEAD SCREWS SCREWS
4. Mud Guard Screws
WALL PLATE BOX
ITEM #3: SENSOR ASSEMBLY ITEM #4: ACTIVATION BUTTON
ITEM #4: ACTIVATION BUTTON ITEM #5: BATTERY PACK ITEM #6: 4X BATTERIES
6. Instructions
5. Activation Assembly
Screws
Code No. 08160063
Rev. 1 (07/22)
ITEM #4: #8-32 X 2" TRUSS ITEM #5: 1/4-20 X 2"
HEAD SCREWS SCREWS
ITEM #5: BATTERY PACK ITEM #6: 4X BATTERIES ITEM #7: 4X #8-32 X 2" ITEM #
TRUSS HEAD SCREWS
ITEM #7: 4X #8-32 X 2" ITEM #7: 5/64" HEX KEY
TRUSS HEAD SCREWS