USSC USG730SS Owner’s Instruction And Operation Manual page 6

READ ALL INSTRUCTIONS BEFORE INSTALLING
AND USING THE APPLIANCE
TOOLS & MATERIALS NEEDED FOR
INSTALLATION
• #3 phillip screwdriver (use of a drill with a phillips bit
will speed up the assembly process)
Use proper assembly technique when installing bolts,
start all bolts first and then tighten appropriately. The
assistance of a second person is strongly recommended.
Remove the grill contents for assembly. Do Not
Remove The Searing Station.
STEP 1 BASE AND PEDESTAL ASSEMBLY
1. Swivel Wheel Installation
• Attach both swivel wheels, one at a time; to the grill
base using the provided bolts, lock washers, and flat
washers.
2. Fixed Wheels Installation
• Slide the axle through the hole located in the front side
flange of the grill base.
• Secure the axle to the grill base using the provided
washer, lock washer, and nut.
• Repeat these steps to attach the second fixed wheel to
the other side of the unit.
3. Assembling the Pedestal
• Attach the left and right pedestal panel to the center
© 2021 United States Stove Company
ASSEMBLY INSTRUCTIONS
pedestal panel using the provided washers and bolts.
4. Attaching the Pedestal
• Attach the assembled pedestal to the base using the
provided washers and bolts.
Screw C
Washer H
Washer E
5. Attaching the Main Body
THE ASSISTANCE OF A SECOND PERSON IS
STRONGLY RECOMMENDED FOR THIS STEP.
• Attach the main grill body to the assembled pedestal
with the provided washers and bolts.
Note: The three cushioned pads installed between the lid
and the body of the unit are for shipping purposes only.
Please remove them.
6
ATTENTION:
Screw A
Washer H
Washer E
Screw A
Washer H
Washer E