Download Print this page

AFi MTM-61 Instruction Manual page 4

Video transmitter with bi-directional sensornet data

Advertisement

MTM-61 STATUS INDICATORS
The MTM-61 provides the following LED status indicators to aid in installation and troubleshooting:
VLI
A bi-color LED indicator is provided for the video input to the MTM-61. DC power and video status
associated with this LED is summarized below.
Video Presence LED
Green
Red
Off
OLI
A bi-color LED indicator monitors the power of the optical input signal that is being received at the
MTM-61 from the MRM-61 or the RRM-61. DC power and optical input status associated with this LED
are summarized below.
Optical Level Indicator
Green
Red
Off
DATA TX and DATA RX
A red DATA TX LED indicator is provided to monitor the Sensornet input data from the electrical
interface, through the MTM-61, and out onto the fiber. A red DATA RX LED indicator is provided to
monitor the Sensornet data coming in from the fiber, through the MTM-61, and out onto the electrical
interface. The intensity of these data indicators will vary, however in typical applications they will cycle
on and off as data is transmitted and received. Data status associated with each of these LEDs is
summarized below.
DATA TX / RX LED
Red
Off
LIFETIME WARRANTY INFORMATION
American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of
defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive
option of American Fibertek. A Return Material Authorization (RMA) number is required to send the
products back in case of return. All returns must be shipped prepaid. This warranty is void if the
products have been tampered with. This warranty shall be construed in accordance with New Jersey
law and the courts of New Jersey shall have exclusive jurisdiction over this contract. EXCEPT FOR
THE FOREGOING WARRANTY, THERE IS NO WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR OTHERWISE, EXPRESSED OR IMPLIED, WHICH EXTENDS
BEYOND THE WARRANTY SET FORTH IN THIS AGREEMENT. In any event, American Fibertek will
not be responsible or liable for contingent, consequential, or incidental damages. No agreement or
understanding, expressed or implied, except as set forth in this warranty, will be binding upon
American Fibertek unless in writing, signed by a duly authorized officer of American Fibertek.
SERVICE INFORMATION
There are no user serviceable parts inside unit. In the event that service is required, please direct all inquiries to:
American Fibertek, Inc.
120 Belmont Drive
Somerset, NJ 08873
DC Power Status
On
On
Off
DC Power Status
On
On
Off
Sensornet Status
Data Flow Present
Data Flow Not Detected
E-mail:
techinfo@americanfibertek.com
Video Status
Proper Input Video Present
Input Video Not Detected
Check Power Supply Input
Optical Status
Proper Optical Input Power Present
Optical Input Not Detected
Check Power Supply
Phone: (877) 234-7200
Phone: (732) 302-0660
FAX (732) 302-0667
4

Advertisement

loading