Canon imagePRESS Server M10 Service Manual page 50

6. If you installed a new HDD, install system software (see
A spare HDD is shipped without preinstalled system software.
7. Make sure to configure the date and time in Setup (see
8. Before you leave the customer site, verify the imagePRESS Server operation.
• Connect the imagePRESS Server to the network (see
codest" on page 17).
• Ask the site administrator to check the Setup options (see Configuration and Setup).
"Installing System Software" on page
"To configure the system date and time" on page
"imagePRESS Server connector panel and LED diagnostic
44
3. REPLACING PARTS
46).
25).