Table of Contents
Advertisement
Table 7. Components on the side view of the ST650 V3
Processor 2 and heat sink
1
PCIe adapter holder or A2/L4 GPU air duct, upper
2
Fan 4, fan 3, fan 2, fan 1 (top to bottom)
3
Drive bay for ODD drive cage, tape drive cage, or
4
expansion drive cage
3.5-inch or 2.5-inch drive cages
5
M.2 adapter
6
Internal CFF RAID
7
PCIe adapter holder or A2/L4 GPU air duct, lower
8
Memory module slots
9
Firmware and RoT security module connector
10
PCIe slot 9
11
1
The illustration shows the location of certain parts. Some parts may not be supported at the same
Note:
time within certain configuration(s).
System-board layout
The illustrations in this section provide information about the connectors, switches, and jumpers that are
available on the system board.
For more information about the LEDs that are available on the system board, see
page
37.
System-board connectors
The following illustration shows the internal connectors on the system board.
ThinkSystem ST650 V3 System Configuration Guide
26
12
1
13
14
15
1
16
17
18
1
19
20
21
PCIe slot 8
PCIe slot 7
PCIe slot 6
PCIe slot 5
Processor 1 and heat sink
Intrusion switch
PCIe slot 4
PCIe slot 3
PCIe slot 2
PCIe slot 1
"System-board LEDs" on
Advertisement
Table of Contents
