Table of Contents
Advertisement
In this mode, connection to the USB port is shared by the server and Lenovo XClarity Controller, while the
port is switched to Lenovo XClarity Controller.
• Shared mode: owned by host
In this mode, connection to the USB port is shared by the server and Lenovo XClarity Controller, while the
port is switched to the server.
2
USB 3.2 Gen 1 (5 Gbps) connector
The USB 3.2 Gen 1 (5 Gbps) connector can be used to attach a USB-compatible device, such as a USB
keyboard, USB mouse, or USB storage device.
3
External diagnostics handset connector
Connect the external diagnostics handset here. See
details.
VGA connector
4
Connect a monitor to this connector.
System-board-assembly layout
The illustrations in this section provide information about the connectors, switches, and jumpers that are
available on the system board assembly.
The following illustration shows the layout of the system board assembly which contains the firmware and
RoT security module, system I/O board, and processor board.
Figure 12. System-board-assembly layout
System I/O board
1
"External diagnostics handset" on page 36
Firmware and RoT security module
2
for more
Processor board
3
.
Chapter 2
Server components
25
Advertisement
Table of Contents
