Samsung AM072BXV Series Service Manual page 292

Key Options
8-3 Outdoor unit option switch settings (cont.)
- Outdoor unit Address setting
Order Display
1
2
3
4
- Quantity of indoor unit
Order Display
1
2
3
Samsung Electronics
▪ Normal display : "Ad 00"
▪ Outdoor address is not set : "od nd"
▪ Press and hold simultaneously K1, K2 to enter the setting mode.
(When entering the setting mode, letters are displayed as the left : "od 00")
- od means Outdoor unit
▪ Press the K4 button shortly : Setting a 1-digit
▪ Press the K1 button shortly : Setting a indoor quantity
▪ When entering the Indoor setting mode, letters are displayed as the left : "id 00"
- id means Indoor unit
▪ Manual setting mode (Default)
- Press the K2 button shortly : Setting a 10-digit
- Press the K4 button shortly : Setting a 1-digit
▪ Automatic setting mode (Option)
Press and hold the K4 button : It is changed to the automatic setting mode, and displays the
number of the connected indoor unit.
(Ex. If 10 indoor units are connected, "id 10" is indicated.)
- If press the K2, K4 button shortly in the automatic setting mode, it is changed to the manual
mode. (Ex. If 10 is indicated and press the K4 button, 11 is indicated and changed to the manual
mode.)
▪ Heat recovery model : Setting Mcu address.
- Press the K1 button shortly : Setting a MCU address
▪ Heat Pump model : Confirm settings
- Press and hold the K2 button
- All settings are saved
- After a screen flickers between 3 seconds, and tracking normally
▪ Cancel settings
- Press and hold the K1 button to exit without saving the settings
Description
Description
286