Zte MC888 Getting Started page 17

Voice Related Problems
Symptoms
There is no dial tone.
There is a prompt
/ phone alert /
announcement as
soon as I lift the phone
off the hook.
The line is noisy/
distorted when I lift the
phone off the hook.
I hear a rapid engaged
tone as soon as I lift
the phone off the hook.
After dialing the last
digit I hear nothing/
silence.
Possible Problems/ Solutions
Please wait for 1~2 minutes after the router is turned on.
If the SIG indicator is weak, you have no good RF
reception. Change the location of the router.
Make sure your nano-SIM card is inserted correctly and
the PIN number has been entered. If the PIN number
has been entered incorrectly, you need to enter the PUK
code when prompted.
• R emove any electrical appliance which is too close
to the phone or your device.
• T he cable or phone set might be faulty.
• Put the phone on the hook and try again.
• Please contact your service provider.
When you have finished dialing you can press the # key
or wait 4~8 seconds to connect the call.
15