Graco SaniForce 24N300 Instructions Manual page 12

2:1 sanitary piston
Hide thumbs Also See for SaniForce 24N300:
Table of Contents

Advertisement

Repair
Air Valve
Valve Disassembly:
Disassembly: Follow these steps to
5. Air
Air
Valve
Disassembly:
disassemble the air valve for cleaning or parts
replacement.
a. Remove three screws (114), then remove
the valve cap (108). Remove gasket (107)
and spacers (111).
Figure 3
b. Pull three o-rings (112) out the sides of the
valve. Remove o-ring (106).
Figure 4
12
Tel: 866-777-6060
Fax: 866-777-6383
Air Valve
Valve Replacement:
6. Air
Air
Valve
replace the entire air valve, without disassembly.
a. Purchase Kit 262035 to replace entire valve
assembly.
b. Clamp piston in a vice. Hold the piston cap
with a spanner wrench and unscrew the air
valve (105). Wedge a screwdriver blade
between the screw heads and the hex cap of
the air valve to turn.
Figure 5
c. Remove o-rings (115, 106).
d. Replace with the new assembled valve and
o-rings from Kit 262035. Use pipe sealant on
the threads of the valve (105) and torque to
15 to 20 ft-lbs (20.3 to 27.1 N·m).
Springer Pumps, LLC
Replacement: Follow these steps to
Replacement:
Website: www.springerpumps.com
Int'l: +001 267 404 2910
3A2977L

Advertisement

Table of Contents
loading

Table of Contents