Page 1
EVERPURE® BWS350 REVERSE OSMOSIS (RO) SYSTEM WITH TANK SIMPLE INSTALLATION GUIDE For Models: BWS350 164-14366 BWS350-16 164-14375 BWS350-50 164-14376 BWS350-50HF BWS350 REVERSE OSMOSIS SYSTEM WITH TANK SIMPLE INSTALLATION GUIDE FOODSERVICE.PENTAIR.COM...
Page 2
INTRODUCTION General Information • Installation must conform to all local codes and regulations. • The system must be installed indoors and easily accessed for • Keep tubing and hoses as short as possible avoiding loops or service and maintenance. kinks in tubing. Do not cut tubing with wire crimpers or dikes. •...
C. Using green tubing, connect the water supply to [A] water processor feedwater inlet. 3. Make the Processor to Storage Tank Connection A. Connect 3/8" blue tubing to [D] the optimized water to storage tank outlet. PENTAIR® EVERPURE® BWS350 REVERSE OSMOSIS SYSTEM WITH TANK SIMPLE INSTALLATION GUIDE • 3...
Page 4
INSTALLATION CONTINUED B. Route blue tubing to the optimized water storage tank. 4. Make the Storage Tank to Processor Connection A. Connect ½" ID gray hose to ½ "hose barb adapter and clamp. Then connect to [E] tank repressurization return. ½"...
Page 5
D. Install the MA-Q15 mineral cartridge in the same manner Overall view of completed installation. into the forth (far right) head. PENTAIR® EVERPURE® BWS350 REVERSE OSMOSIS SYSTEM WITH TANK SIMPLE INSTALLATION GUIDE • 5...
SYSTEM START-UP 1. Purge Air and Flush System B. Set blending valve to desired optimized water TDS. a. Turn on power to water quality indicator. A. Turn emergency bypass valve to the “System Bypass” mode. While holding the optimized water line over a drain, turn on b.
4b. COMPLETE THE INSTALLATION Secure tubing, hoses, and wires as needed to assure the installation is neat and not susceptible to damage. PENTAIR® EVERPURE® BWS350 REVERSE OSMOSIS SYSTEM WITH TANK SIMPLE INSTALLATION GUIDE • 7...