Kobalt SGY-AIR293 Assembly Instructions Manual page 15

CARE ANDMAINTENANCE
3. Fill the Paint Cup (H) about 1/4 full of cleaning
solution and spray the entire contents out into
a secondary container.
4. Remove the Paint Cup (H) from the Spray
Gun by turning counterclockwise, and place
it in the secondary container to soak
3 - 5 minutes.
Note: You will need to add additional cleaning
solution to the container.
5. Unscrew the Air Cap (A) by hand turning
counterclockwise and place it in the
secondary container to soak.
6. Unscrew the Fluid Adjustment Knob (E) by
turning counterclockwise, using a damp cloth
with cleaning solution on it, wipe off the fluid
adjustment knob and set it aside.
7. Pull out needle spring and the paint needle.
Place it in the secondary container to soak.
3
4
Counter-
clockwise
5
Counter-
clockwise
6
7
15
Counterclockwise
I
Load cleaner
H
A
Counterclockwise
E