Clutch Lever - Yamaha XT250P Owner's Manual

Dimmer switch " / "
Set this switch to " " for the high
beam and to " " for the low beam.
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Engine stop switch " /
Set this switch to " " (run) before start-
ing the engine. Set this switch to "
(stop) to stop the engine in case of an
emergency, such as in the event of an
overturn or if the throttle is stuck.
Start switch " "
Push this switch to crank the engine
EAU12402 with the starter. See page 6-2 for start-
ing instructions prior to starting the en-
gine.
EAU12461
"
". When re-
EAU12501
EAU12663
"
"
EAU12713
Instrument and control functions

Clutch lever

1. Clutch lever
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 6-3.)
4-6
EAU12823
1
1
2
3
4
5
6
7
8
9
10
11
12