Table of Contents
Advertisement
Reset the cooking time to zero using the
▶
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
9.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ The end time cannot be set for types of heating with
grill function.
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment too long.
Requirements
¡ A type of heating and a temperature or setting are
set for the main oven .
¡ A cooking time is set.
Press the
button repeatedly until
1.
in the display.
Press the
or
button.
2.
a The display shows the calculated end time.
Use the
or
button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
10 Childproof lock
Secure your appliance to prevent children from acci-
dentally switching on the main oven
settings.
Notes
¡ You can go to the basic settings → Page 14 to
specify whether you want the option to set the child-
proof lock.
¡ After a power cut, the childproof lock is deactivated.
button.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
▶
a The appliance applies the change after a few
Cancelling the end time
You can delete the set end at any time.
Requirement:
▶
a After a few seconds, the appliance applies the
9.5 Setting the time on the clock
Once the appliance has been connected to the mains
is highlighted
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position .
1.
2.
a The time that is set appears on the display.
Tip: You can go to the basic settings → Page 14 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The function selector must be set to the
"Off" position .
button.
1.
2.
a The appliance applies the change after a few
10.1 Activating and deactivating the
or changing the
childproof lock
Requirement: The function selector must be set to the
"Off" position .
▶
is highlighted on the display.
Use the
or
button to delay the end time.
seconds.
is highlighted on the display.
Reset the end time to the current time plus the set
cooking time using the
change and starts heating up. The cooking time
counts down.
Use the
or
button to set the time.
Press the
button.
Press the
button repeatedly until
in the display.
Use the
or
button to change the time.
seconds.
To activate the childproof lock, press and hold the
button until
appears in the display.
To deactivate the childproof lock, press and hold
‒
the
button until
Childproof lock en
button.
is highlighted
goes out in the display.
13
Advertisement
Table of Contents
