Table of Contents
Advertisement
en Appliance door
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Open the appliance door fully.
1.
Open the locking levers on the left- and right-hand
2.
hinges .
a The locking levers are open. The hinges are now se-
cured and cannot snap shut.
Close the appliance door fully .
3.
Push on the left- and right-hand side of the door
4.
cover from the outside
Remove the door cover .
5.
Lift out the inner pane and set it down carefully on a
6.
flat surface.
20
until it is released.
If necessary, you can remove the condensate
7.
trough for cleaning.
Open the appliance door.
‒
Tilt the condensate trough upwards and remove
‒
it.
8.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or
▶
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
Clean the condensate trough with a cloth and hot
9.
soapy water.
Clean the appliance door.
10.
→ "Suitable cleaning agents", Page 15
Dry the door panes and refit them.
11.
→ "Installing the door panes for the lower the appli-
ance door ", Page 20
15.4 Installing the door panes for the lower
the appliance door
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Open the appliance door fully.
1.
Place the condensate trough vertically in the re-
2.
tainer
and turn it downwards.
Advertisement
Table of Contents
