Siemens iQ500 NB535AB 0B Series User Manual And Installation Instructions page 34

Hide thumbs Also See for iQ500 NB535AB 0B Series:
Table of Contents

Advertisement

en Installation instructions
Remove the transport locks on the right and left and
6.
then dispose of them.
The appliance must be transported by two people
7.
using the carry handles on the right and left, while
securing the front of the appliance with one hand.
Place the appliance in the unit and fold the carry
8.
handles down.
Push the appliance in fully.
9.
Do not kink or trap the connecting cable, or route it
over sharp edges.
Centre the appliance.
10.
There must be an air gap of at least 5 mm between
the appliance and adjacent unit fronts.
Use a spirit level to adjust the appliance so that it is
11.
perfectly level.
34
Attach the brackets for the metal screws that are in
12.
the accompanying bag to the appliance.
Secure the appliance using the wooden screws sup-
13.
plied in the cooking compartment.
20.10 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
Lift the appliance slightly and pull it out completely.
3.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq500 nb535abs0b

Table of Contents