Getting Ready To Sew Connecting The Power Supply - ELNA eXcellence 680+ Instruction Manual

z x
q
z
c
e
w
t
r
To remove:
z To remove the legs from the table top, you do not have
to loosen the setscrews.
Turn the leg clockwise to remove the leg from the
table top.
x To attach the leg to the table top again, insert the
leg into the attachment of the leg, then turn the leg
counterclockwise until it stops.
GETTING READY TO SEW
Connecting the Power Supply
z First make sure the power switch q is off.
x Insert the machine plug w of the power supply cord
into the machine socket e.
c Insert the power supply plug r into the wall outlet t,
and turn the power switch q on.
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Wall outlet
NOTE:
Make sure to use the power supply cable that came
with the machine.
If you turn off the power switch, wait for 5 seconds
before turning it on again.
WARNING:
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control.
7