Uniform Stitch Adjustment; Unified Needle Drop Position - ELNA eXcellence 680+ Instruction Manual

q
(A) (B) (C)

Uniform Stitch Adjustment

The stitch width and length of the programmed patterns
can be uniformly adjusted.
Example: Adjusting the stitch width of the programmed
pattern 52 (mode 2) and its mirror image.
Shift the cursor to the right of the last programmed
pattern.
Press the stitch width adjusting key to adjust the stitch
width.
w
The stitch width of the programmed patterns will be
adjusted uniformly.

Unified Needle Drop Position

The needle drop position of the programmed patterns will
vary depending on the pattern combination:
(D)
(A) Unified to the left when combining the patterns with
(B) Unified to the right when combining the patterns with
(C) Unified to the center when combining the patterns
(D) Unified to the center when combining the patterns
84
NOTE:
Stitch length can be uniformly adjusted if the
programmed patterns in the same category (satin
stitches or stretch stitches) have been programmed.
q Original width
w Uniformly adjusted width
the left needle position and the center needle
position.
the center needle position and the right needle
position.
with the left needle position and the right needle
position.
with the left, center and right needle positions.