Getting Ready To Sew Connecting The Power Supply - ELNA eXplore 150 Instruction Book

q
r
w
e
GETTING READY TO SEW
Connecting the Power Supply
z Turn the power switch off.
x Insert the machine plug into the machine
socket.
c Insert the power supply plug into the wall outlet.
v Turn the power switch on.
q Power switch
t
w Machine plug
e Machine socket
r Power supply plug
t Wall outlet
NOTE:
Before connecting to the power supply, make
sure the voltage shown on the machine
conforms to your electrical power.
WARNING:
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
Always turn off the power switch and unplug
from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control,
otherwise the machine will run intermittently.
6