Lockout Key; Changing The Presser Foot - ELNA eXcellence 680+ Instruction Manual

q
t
e
r

Lockout Key

Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons and keys are
deactivated.
To unlock the machine, press this key again.

Changing the Presser Foot

CAUTION:
Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
replacing the presser foot.
Raise the needle to its highest position and raise the
presser foot lifter.
w
Press the black lever on the back of the foot holder.
The presser foot will drop off.
q Lever
w Presser foot
Attaching the presser foot
Place the presser foot so that the pin on the foot lies just
under the groove of the foot holder.
Lower the presser bar to lock the foot in place.
Each foot is marked with an identification letter.
e Groove
r Pin
t Identification letter
14