Menu / Advanced Settings; Peak Hold - VETEC V-LINK WRDX01 User Instructions

5. Menu / Advanced settings

5.1. Peak hold

Activate peak hold
*Peak Hold is as default off.
Repeat lift
Press the ON/OFF button.
Press and hold MENU until the display shows
1.
Select 1 (Menu 1) by pressing ENTER.
The display shows
Press to go to
Press ENTER to activate Peak hold.
The display now shows 1.
Press RETURN to see the untared measure-
ment. Press RETURN to return to measure-
ment.
When peak hold is activated, the second
button lights up red.
Lift a load and the display will "freeze" at the
highest measurement recorded.
Press and hold →0← until the display shows 0.
Lift a load.
The display will "freeze" at the highest mea-
surement recorded.
Repeat the above if needed.
- 29 -
PEoFF (Peak hold off).
PE on (Peak hold on).