Quick start guide
The instructions contained in this quick guide do not replace the full manual.
Make sure to read the whole manual carefully and correctly before use.
On/off
*The dynamometer will not automatically turn off if not used.
Tare function
Tænd / Sluk
*The tare function will automatically deactivate when the dynamometer is turned off .
Peak hold
Low battery
Tænd / Sluk
Press ON/OFF to turn on and off .
Once pressed, the display shows the soft-
ware version number for a few seconds.
Then the untared value will show.
To activate the tare function press and hold
→0← until the display shows
button lights.
Press →0← to deactivate.
Press and hold MENU until the display
shows 1. Use the arrows to choose be-
tween menu
1
and 2.
Menu 1: Peak hold function.
! See Advanced Settings for complete
instruction.
The battery indicator will fl ash when the
battery is low and needs to be charged.
- 21 -
0
and the red