Basic Settings - VETEC V-LINK WRDX01 User Instructions

4. Basic settings

On / off
*The dynamometer will not automatically turn off if not used.
Tare function
*The tare function will automatically deactivate when the dynamometer is turned off .
Low battery
Press ON/OFF to turn on and off .
Once pressed, the display will show
the software version number for a few
seconds.
Then the untared value will show.
To activate the tare function press and hold
→0← until the display shows
button lights.
The tare function will automatically deac-
tivate when the dynamometer is turned off .
The battery indicator lights blue when char-
ging. The blue light will turn off when fully
charged.
- 28 -
0 and the red