How To Operate The On-Screen Menu - Sanyo PLC-XF1000 Owner's Manual

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer
to the respective sections in this manual.
1
Press the MENU button on the side control or the
remote control to display the On-Screen Menu.
2
Use the Point buttons to select a Menu icon.
7 8
Use the Point ed buttons to select an item in the
selected menu.
3
Press the SELECT button to show the item data.
Use the Point 7 8 buttons to adjust the values.
To close the On-Screen Menu, press the MENU
button again.
✔
Note:
•The selected item is not active until the SELECT button is
pressed.
Press the SELECT button here
to display previous items.
Press the SELECT button here
to display next items.
Side Control
Remote Control
On-Screen Menu
Menu bar
Pointer (red frame )
Press the Point ed
to move the pointer.
Item
SELECT
button
Item data
Press the Point
buttons to adjust the
value.
Basic Operation
MENU button
POINT buttons
SELECT button
MENU button
POINT buttons
SELECT button
Menu icon
Pointer
(red frame )
buttons
7 8
25