Indicators - Sanyo PLC-XF1000 Owner's Manual

Indicators

q
w
e
r
t
y
u
Part Names and Functions
q LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode (pp.72-74).
w READy indicator
This indicator lights green when the projector
is ready to be turned on. And it flashes green in
Power Management mode (pp.52, 72-74).
e wARNING TEMP . indicator
This indicator flashes red when internal projector
temperature is too high (pp.65, 72-74).
r wARNING FILTER indicator
– Blink slow when the filter is being scrolled (pp.
57 , 72).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.57 , 74).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement (pp.56, 57 , 74).
t SHUTTER indicator
Light blue when the shutter is closed (p72).
y LAMP 2 REPLACE indicator
Turn orange when the life of the projection lamp2
draws to an end (pp.61, 73).
u LAMP 1 REPLACE indicator
Turn orange when the life of the projection lamp1
draws to an end (p.61, 73).
13