Table of Contents
Advertisement
CANFDNET-400U
High-performance Four-channel CANFD Bus-to-Ethernet Converter User Manual
5. Quick Instructions
5.1 Configuring the Converter
5.1.1
Entering Configuration Mode
After the device is powered on, set the switch to the "CFG" position, as shown in
Figure 5.1. The system enters the configuration state, and the CFG indicator is on. The
converter can be configured.
5.1.2
Connecting the Converter by Using the Configuration Tool
In the configuration mode, connect the PC and the converter by using a serial cable.
Run the "CANFDCOM-100IE Configuration" host software, as shown in Figure 5.2.
Select the PC serial port connected to the converter, "COM15" in the example. Click the
"Connect Device" button. After a successful connection, the "Connect Device" button
becomes a "Disconnect" button.
Figure 5.1 Entering the configuration mode
Figure 5.2 Connecting a device
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
38
User Manual
Advertisement
Table of Contents
