Table of Contents
Advertisement
CANFDNET-400U
High-performance Four-channel CANFD Bus-to-Ethernet Converter User Manual
the repeater will buffer the data received by the serial port, and forward the data by
message at a time based on the preset delay time. The value is 0-500 ms.
repeater cache is limited. If the preset delay time is too long, it may cause too much data
accumulation at the serial port, which results in overflow and loss.
3.2.2
Serial Port Parameters
As shown in Figure 3.3, this option mainly sets serial port related parameters.
Baud rate: The baud rate of the serial port ranges between 1,200 bps and 921,600
bps.
The data is: between 7 and 8 bits.
Stop bit: 1 or 2.
Parity: no parity, even parity, or odd parity.
Mode switching: RS232 mode, RS485 mode, or RS422 mode.
3.2.3
CAN Parameters
As shown in Figure 3.4, this option mainly sets CAN related parameters.
Figure 3.3 Serial port parameter settings
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
11
User Manual
Note: The
Advertisement
Table of Contents
