Maxi-Cosi ISOGO Quick Setup

Rear Facing Mode
Quick Setup with
1 2
Pull
Pull
6
Recline
Indicator
Press
Recline seat for Loosen harness
infant use
10 11
click
Pull
Fully lengthen ISOGO Attach ISOGO
connector straps connectors
19 20
Store strap in storage Place child in the
pocket restraint
ISOGO
(if fitted)
3 4
Raise headrest height Unbutton seat trim
12 13
Push
Pull
Remove slack Close Smart Lock
®
21
Harness straps
in green zone
The shoulder
straps must be in
the slots which are
nearest the child's
shoulders, but not
lower than the
child's shoulders.
5 6
Open installation door Lift Smart Lock handle
®
(use to hold door open)
14 15
Ensure the tension Close installation door
indicators show green and restore seat fabric
22 23
Pull
click
Tighten the harness
Engage harness buckle
7 8
Open ISOGO storage Unclip ISOGO
compartment connectors & close door
16 17
Engage
tether
Attach
Attach the top tether Thread tether through
strap Smart Guide
®
24
Do not engage
conventional tether
position on both sides
Double check shoulder
of restraint.
height markers
9
Thread connectors
through belt path
18
Remove
Slack
Remove slack from top
tether
Do not engage tether
on both sides of
restraint.