Inserting And Removing An Sd Memory Card (Optional Accessory) - Sanyo Xacti VPC-503 Owner's Manual

Inserting and Removing an SD Memory Card (Optional Accessory)

The digital camera comes with 8MB of internal memory, allowing you to store captured still images or video
clips in the digital camera. Moreover, you can also expand the memory capacity by using an optional SD
(Secure Digital) memory card so that you can store more files.
1. Make sure your camera is turned off before inserting or removing a
memory card.
2. Open the battery/SD memory card cover.
3. Insert an SD memory card in the correct orientation as shown in
the illustration.
4. Close the battery/SD memory card cover.
To remove the SD memory card, make sure the camera is
turned off. Press lightly on the edge of the memory card and it
will eject.
Be sure to format an SD memory card with this digital camera before using it.
Refer to section in the manual titled "Formatting an SD Memory Card or
Internal Memory" for further details.
To prevent valuable data from being accidentally erased from an SD card,
you can slide the write protect tab (on the side of the SD memory card) to
"LOCK".
To save, edit, or erase data on an SD memory card, you must unlock the
card.
EN-18