Connecting To A Pictbridge-Compatible Printer - Sanyo Xacti VPC-503 Owner's Manual

Connecting to a PictBridge-Compatible Printer

Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge
to perform image selection and printing using the camera screen and controls. DPOF support also lets you
specify which images you want to print and how many copies of each should be printed.
Connecting the camera to the printer
1. Rotate the mode dial to
the power switch.
2. Press the four-way controller ( ) to select the [Set-up2] menu,
then use the four-way controller ( ) to select [USB Mode]. Press
the button.
3. Use the four-way controller (
the button.
4. Connect your camera and the printer via a supplied USB cable.
The message "One moment" will appear on the on the LCD
monitor screen.
On Windows 98/98SE/ME/2000, if the camera is connected to your computer and you unintentionally set the camera's
USB connection to PictBridge, the "Install Driver" message will appear. Ignore this message and click "Cancel".
and turn your camera on by pressing
) to select [PictBridge], then press
USB Mode USB Mode USB Mode
PC PC PC
PictBridge PictBridge PictBridge
PC CAM. PC CAM. PC CAM.
Cancel : MENU Cancel : MENU Cancel : MENU
Select : Select : Select :
EN-51