Inserting An Sd/Mmc Memory Card; Turning On - Sanyo VPC S6 - Xacti Digital Camera User Manual

14 Camera Setup

Inserting an SD/MMC Memory Card

The camera features 16 MB internal flash memory but you may also use an optional
SD/MMC memory card for additional storage.
Follow these instructions to insert the SD/MMC card.
1. Open the battery
compartment at the
bottom of the camera.
2. Insert the SD/MMC card
into the memory card
slot as shown.
3. Close the battery
compartment.
To remove the SD/MMC card, gently push the card until it pops out. Pull out the
card carefully.

Turning On

Press and hold the Power button to turn on the camera. To turn off the camera,
press the Power button again.
Inserting an SD/MMC Memory Card