Inserting An Sd/Sdhc Memory Card - Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Instruction Manual

16 Camera Setup

Inserting an SD/SDHC Memory Card

The camera features 16 MB internal flash memory but you may also use an optional SD/
SDHC memory card for additional storage.
Follow these instructions to insert the SD/SDHC card.
1. Open the battery compartment on
the left of the camera.
2. Insert the SD/SDHC card into the
memory card slot as shown.
(Label side up)
3. Close the battery compartment.
To remove the SD/SDHC card, gently push the card until it pops
out. Pull out the card carefully.
Note:
Please do not take in and out the SD/SDHC card while camera is processing. It will make
unexpected error or image damaged.
Inserting an SD/SDHC Memory Card