Inserting An Sd/Sdhc Memory Card - Sanyo VPC-S1414 Instruction Manual

4. Close and lock the battery/memory card compartment.

Inserting an SD/SDHC Memory Card

Expand your camera's storage by using SD or SDHC memory
cards.
1. Unlock and open the Battery/memory card compartment at
the bottom of the camera.
2. Insert the SD/SDHC card into the memory card slot with the
metallic part facing the back side of the camera.
3. Push the SD/SDHC card into the memory slot until it clicks
into place.
4. Close and lock the Battery/memory card compartment.
To remove the SD/SDHC card
1. Unlock and open the battery/memory card compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
The battery may feel warm after it has been charged or immediately after being used.
This is normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery warm by holding
them inside your outer clothes.
14