Sanyo Xacti VPC-503 Owner's Manual page 81

Symptom
Flash does not fire.
Continuous shooting is
not possible.
Cannot transfer files
over a USB
connection.
Possible causes
* Flash off is selected in flash mode.
* 10+2 sec. Self-timer is selected in
self-timer mode.
* The [Capture Mode] is set to [Burst] or
[AEB].
* The camera is in the
* The capacity of the built-in memory or
SD memory card is full.
* USB cable is not connected securely.
* USB driver is not installed.
* Camera is turned off.
Solutions / Corrective Actions
* Select a different flash mode.
* Select [AF] in the [Capture Mode].
* Switch the mode dial to another
mode.
(video) mode.
* Insert SD memory card with available
space or delete unwanted images.
* Check all connections.
* Install the USB driver on your
computer.
* Turn on the camera.
EN-81