Setting The Date And Time - Sanyo Xacti VPC-503 Owner's Manual

Setting the Date and Time

Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to
the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller ( ) to select [Date & Time] and the
four-way controller (
button.
4. Press the four-way controller (
Time fields.
To increase a value, press the four-way controller ( ).
To decrease a value, press the four-way controller ( ).
The time is displayed in 24-hour format.
5. Press the button after all fields are set.
The date illustration shown is for the purpose of explanation and may differ from the actual setting of your camera.
EN-22
and turn your camera on by pressing
) to switch the date types,then press the
) to select Day, Month, Year and
Set-up1 Set-up1 Set-up1 Set-up2 Set-up2 Set-up2 Set-up3 Set-up3 Set-up3
Format Format
Beeper Beeper Beeper Louder Louder Louder
Date & Time Date & Tim te & Time m/d/y m/d/y m/d/y
Language Language Langu En Englis English
Select : Select : Select :
Date & Tim Date & Time te & Time
01 01 01 / 01 / 2006 / 01 / 2006 / 01 / 2006
00 : 00 00 : 00 00 : 00
Cancel : MENU Cancel : MENU Cancel : MENU Select : Select : Select :
lish