Step 2: Connect The Digital Camera To Your Computer - Sanyo Xacti VPC-603 Owner's Manual

Step 2: Connect the digital camera to your computer

1. Rotate the mode dial to
the power switch.
2. Press the four-way controller ( ) to select the [Set-up2] menu,
then use the four-way controller ( ) to select [USB Mode].
3. Press the button.
4. Use the four-way controller ( ) to select [PC], then press the
button.
5. Turn off your camera.
6. Connect your camera and the computer via the supplied USB
cable.
7. Turn your camera on by pressing the power switch.
8. There will be a new "Removable Disk" icon detected in "My
Computer", which contains your recorded images or movie clips.
(For Mac users, double-click [untitled] or [unlabeled] disk drive
icon on our desktop.)
and turn your camera on by pressing
Set-up1 Set-up1 Set-up1 Set-up2 Set-up2 Set-up2 Set-up3 Set-up3 Set-up3
USB Mode USB Mode USB Mode
TV TV TV NTSC NTSC NTSC
LCD Brightnes LCD Brightness CD Brightness
Auto Shut D Auto Shut Down uto Shut Down 3 Min. 3 Min. 3 Min.
Select : Select : Select :
USB Mode USB Mode USB Mode
PC PC PC
PictBridge PictBridge PictBridge
PC CAM. PC CAM. PC CAM.
Cancel : MENU Cancel : MENU Cancel : MENU Select : Select : Select :
PC/AV terminal
PC PC PC
EN-57