Sanyo Xacti VPC-603 Owner's Manual page 53

4. After Print Setting is set, the print icon
image. You can still use the four-way controller (
image by your preference, then press the
5. Use the four-way controller (
setting, then press the
[Size]: You may select the desired item depending on the type of
printer being used.
[Borderless]: You may select the desired item depending on the type of
printer being used.
6. This starts printing and displays the message "Transferring" on the
LCD monitor screen.The message will disappear after the printing is
finished. Then the screen returns to [Printing Mode Select].
To cancel printing:
Pressing the button during print data transfer displays the screen
for selecting whether to [Continue] or [Cancel] printing.
is marked on the displayed
button to print.
) to access the paper selection
button to confirm.
) to change the
100-0008 100-0008 100-0008
Select : Print :
Cancel : MENU Set :
Print Paper Print Pape Print per
Size Si Size Standa Standard Standard
Bo Borde Borderless derles less Standard Standard Standa
Total Total 3 otal 3
OK : OK : OK :
Cancel : MENU Cancel : MENU Cancel : MENU
T r a n s f e r r i n g T r a n s a n s f e r r i n r i n g
1 / 3 1 / 3 1 / 3
Cancel : Cancel : Cancel :
Print Print Print
Continue Continue Continue
Cancel Cancel Cancel
OK : OK : OK :
EN-53