Adjusting The Exposure (Ev Compensation) - Sanyo Xacti VPC-603 Owner's Manual

Adjusting the Exposure (EV Compensation)

You can manually adjust the exposure determined by the digital camera. Use this mode when the proper
exposure cannot be obtained, for example, when the contrast (difference between bright and dark areas)
between the subject and the background is extremely high. The EV compensation value can be set from
-2.0EV to +2.0EV.
1. Rotate the mode dial to
2. Press the power switch to turn on the power.
3. Press the four-way controller ( /
of EV compensation value from -2.0EV to +2.0EV.
4. Press the button to confirm the setting.
EN-34
, , , , or .
) and use to set the range
EV EV EV
±0.0 ±0.0 0.0
Select : Select : Select : Set : Set : Set :