Using The Cable Adaptor - Sanyo Xacti VPC-C6 Instruction Manual

USING THE CABLE ADAPTOR

Using the supplied adaptor, you can connect the camera to a computer,
printer, TV or AC adaptor, etc., without using the docking station.
1
Attach the adaptor to the docking station terminal on the bottom of
the camera.
2
Various devices can be connected to the adaptor terminals.
DC IN terminal:
Connect the supplied AC
adaptor.
Cable adaptor
HINT
The remote control unit cannot be used.
i Unlike when using the camera in the docking station, when the adaptor is
connected, the remote control unit cannot be used to operate the camera.
To play back data from the camera, use the operation buttons on the
camera.
USB/AV terminal:
Connect to a computer, printer
or TV.
To docking station
terminal on the camera
Supplied USB interface
cable or S-AV interface cable
Supplied AC adaptor
154
English