Using The Zoom - Sanyo Xacti VPC-CA6 Instruction Manual

USING THE ZOOM

Your camera has two zoom functions: optical zoom and digital zoom.
You can specify whether or not the digital zoom is enabled (page 122).
1
Point the camera lens at the
subject.
2
Push the zoom switch toward the
[T] or [W] side to compose the
desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is moved,
the zoom bar appears on the
monitor.
h When the optical zoom factor is at
maximum, zooming stops
temporarily. When the zoom
switch is pressed toward the [T]
side again, the mode changes to
the digital zoom mode and
zooming continues.
3
Take the picture.
For video clip recording, see page 36.
For shooting still images, see page 40.
Zoom switch
Monitor
When both optical
and digital zoom
are enabled
Optical zoom
Digital zoom (yellow)
When optical zoom
only is enabled
English
Zoom bar
Pointer
52