Checking The Remaining Card Memory; Checking The Remaining Number Of Images And Video Recording Time; For Audio Data - Sanyo Xacti VPC-CA6 Instruction Manual

CHECKING THE REMAINING CARD MEMORY

You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see "Possible No. of
Images/Possible Shooting Time/Possible Recording Time" on page 170.

Checking the remaining number of images and video recording time

1
Turn on the camera (page 24).
h The remaining number of images
appears in the upper left of the
monitor.
h The remaining video recording time
appears in the upper right of the
monitor.
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of
images or the remaining video
recording time is "0", you cannot
capture any more images. To
capture more images, either install a new card, or save the images to
a computer and then delete them (page 90) from the card.
h When the remaining number of images or the remaining video
recording time is "0", it may be possible to capture a few more images
by setting a lower resolution setting (page 61), or selecting a different
image quality setting.

For audio data

1
Set the camera to the audio
recording mode (page 48).
h The remaining audio recording
time is shown.
Remaining number of images
Remaining video
recording time
12
Remaining time
12
English
00:00:58
00:16:00
136