Fujitsu MB2198-169-E Operation Manual page 3

PREFACE
Thank you for purchasing the pseudo power-on debug adapter for the DSU-FR emulator (MB2198-
169-E).
This product is an adapter that connects between the DSU-FR emulator BGA-224P adapter*
(MB2198-160-E) that supports the DSU-FR emulator*
DSU-FR cable (MB2198-10-E), and a header board that is connected to a user system that uses a
Fujitsu MB91470/480 series FR*
function.
This manual describes how to use the pseudo power-on debug adapter for the DSU-FR emulator.
Read this manual carefully before using this product.
Please contact the sales or support representative for details on the mass production and evaluation
MCU models that can be used with this product.
*1 : Referred to below as the "adapter board"
*2 : Referred to below as the "emulator"
*3 : FR, the abbreviation of FUJITSU RISC controller, is a line of products of FUJITSU MICRO-
■ Safe use of this product
This manual contains important information relating to the safe use of this product. Read this manual
before using the product and use the product correctly in accordance with the instructions in this
manual.
In particular, carefully read "■ Caution of the products described in this manual" at the beginning
of this manual and "
using it.
After reading the manual, keep it handy for future reference.
■ Product operating environment
This product has an operating temperature range of +5 °C to +35 °C and an operating humidity range
of 20% to 80%. Use the product in an environment that is free of condensation and avoid high tem-
peratures and humidity.
This product consists of a printed circuit board unit without a frame cabinet with exposed electronic
components. Accordingly, do not place other objects on top of the circuit board and do not allow the
metal parts of the unit to come into contact with people or materials that may have a build-up of static
electricity. Similarly, keep any objects that are flammable, likely to cause a short circuit, or cause
any other such problem well away from the unit when the power to the unit is turned on. Keep the
unit horizontal as far as possible and do not use it in locations that are subject to vibration, dust, ex-
plosive gases, or other such dangers.
If the unit is used in an environment that does not satisfy the above guidelines, there is a risk of un-
expected damage to property or injury to the user or other people in the vicinity. You should also
keep the packaging materials used for shipping the product.
They work well as they are when you transport the product again, for example, if it becomes out of
order and needs to be repaired.
■ Related manuals
Please refer also to the following manuals.
■ European RoHS compliance
Products with a -E suffix on the part number are European RoHS compliant products.
ELECTRONICS Limited.
3. Restrictions
• "DSU-FR EMULATOR MB2198-01-E OPERATION MANUAL"
• "DSU-FR EMULATOR DSU-FR CABLE MB2198-10-E OPERATION MANUAL"
• "DSU-FR EMULATOR BGA-224P ADAPTER MB2198-160-E OPERATION MANUAL"
• "FR60 MB91470/480 Series HARDWARE MANUAL" or "FR60 MB91470/480 Series
DATA SHEET"
• The operation manual of each of the headers
• "S
Workbench OPERATION MANUAL"
OFTUNE
• "S
Workbench USER'S MANUAL"
OFTUNE
2
3
microcontroller and that provides the pseudo power-on debug
" to understand the requirements for safe use of the product before
i
(MB2198-01-E) and DSU-FR emulator
1