Roger PR402DR Quick Start Manual

Access controller and fingerprint readers

Hide thumbs Also See for PR402DR:

Quick start guide

Connection and communication of PR402DR access controller

and RFT1000 fingerprint readers.

typical installation of Pr402dr access controller and rFt1000 fingerprint readers

* NOTE! If the system is operated by means of Ethernet port then RS485 bus is not used for communication with RFT1000 readers.

technical support is available in weekdays:

• from 8:00 am to 4:00 pm at PSTN number +48 55 267 01 26

• from 4:00 pm to 8:00 pm at GSM number +48 664 294 087

Table of Contents

Need help?

Do you have a question about the PR402DR and is the answer not in the manual?

Page 1 Connection and communication of PR402DR access controller and RFT1000 fingerprint readers. typical installation of Pr402dr access controller and rFt1000 fingerprint readers * NOTE! If the system is operated by means of Ethernet port then RS485 bus is not used for communication with RFT1000 readers.
Page 2 Possible scenarios of operation 1. communication by means of ethernet port 2. communication by means of rs485 port ROGER sp.j t. +48 55 272 0132 Gościszewo 59 F. +48 55 272 0133 82-400 Sztum e. roger@roger.pl Polska i. www.roger.pl...

Rft1000