Bradford White EF60T125 Service Manual page 30

Ultra high efficiency water heaters

Hide thumbs Also See for EF60T125:

Step 5: Pressing "Select" button will return display to setpoint in format selected (°F or °C)

immediately

Error Codes and Error History Display:

If there is an operating problem with the water heater, an error code number will appear on the water heater display with

"Service Needed" to the right of the "Status" indicator. The error code label is located under the Water Heater Display

and the following section in this Service Manual explains the error codes with corrective actions to repair the water

heater.

Error Code History:

In "Service Mode" pressing the "Select" button after the "Software Version" (item 8 in the previously described sequence

of service modes) will show an error code history, if there have been any previous operating problems with the water

heater. If the display shows --, there is not a current error code.

The Water Heater Display will provide up to 10 previous error codes. The oldest error code will be stored in code index

#1 and the most recent in code index #10.

Accessing Service Mode on Control Display

For models with Honeywell Integrated Control

°F

idle

Status

Operational

Lower Sensor

SELECT

SET

idle

Service Needed

SELECT

SET

Example of Error Code in the

Display

Show Quick Links