Bradford White EF60T125 Service Manual page 24

Step 2: Press "Set" button to enter setting mode. "Max Setpoint" will flash to indicate setting mode.
Step 3: Press the "UP" or "DOWN" buttons to change the maximum setpoint value. This will limit the maximum setpoint
the user can select. Note: The maximum setpoint is approximately 180°F.
Step 4: Press "Set" button to confirm new "Max Setpoint" value and stop setting
mode.
24
Accessing Service Mode on Control Display
For models with Honeywell Integrated Control
"Max Setpoint" Flashes
Max
°F
Setpoint
idle
Status Operational
SELECT SET
"Max Setpoint" continues to flash
while making adjustments
Max
°F
Setpoint
idle
Operational
Status
SELECT SET
"Max Setpoint" stops flashing
Max
°F
Setpoint
idle
Operational
Status
SELECT SET
24