Table of Contents
Advertisement
MMDS/MMEVS Configuration and Operation
External Memory
Select Header, W5
22
Freescale Semiconductor, Inc.
Jumper header W5 determines where the external memory range
$0240-$FFFF resides. The default position, with the jumper removed,
will use the RAM residing on the control board. If the jumper is installed,
the user should connect external memory to the emulator through a
target cable connected to J2 and J3.
NOTE:
The 0-page external range $001C–$003F will always be
accessed from an external source. The user is required to
connect this external memory to the emulator through the
target cable.
MMDS/MMEVS Configuration and Operation
For More Information On This Product,
Go to: www.freescale.com
Setting M68EM05C0 Jumper
EXT MEM
IN = EXT SRC
FABRICATED
JUMPER
DEFAULT: NOT INSTALLED
M68EM05C0UM/D
MOTOROLA
Advertisement
Table of Contents
