Worx WR206E Owner's Manual page 23

Getting started
2. Update the software
It is recommended you to update the software to the latest firmware. It helps Landroid Vision become smarter. Please note that
Landroid Vision should be updated to the latest firmware at the first time.
Over-the-Air (OTA) updates
If your Landroid Vision is connected to your Wi-Fi network, you will be notified that new software is available via the App. Once
you confirm, the update will happen automatically Over-the-Air.
NOTE: Make sure Landroid Vision is charging or the battery capacity has reached 50% prior to starting the firmware update.
3. Define zones (See Fig. 30 - Fig.31)
The Landroid Vision will follow the lawn edge in a circle to and define the zone:
• at the first time when it is started and comes out of the charging base.
• there is a new zone for Landroid Vision to cut.
Steps to define zones:
• Position Landroid Vision in the charging base.
• Rotate clockwise to access the main menu, select "General settings" and press
• Rotate to select "Define zones", press
• Landroid Vision will start from and return to charging base to complete the zone defining process.
NOTE: Make sure the first time Landroid Vision starts at the charging base and has at least 50% battery.
30
Set date & time
General setting
Language
Time format
Date(dd/mm/yy):
Date format
Time(12h):
Set date & time
1
2
to confirm.
Set date & time
2020/07/07 Date(dd/mm/yy): 2020/07/07
08:37 PM
Time(12h): 08:37 PM
1 1
2 2
Welcome
Mon 11/07 00:00 Mon 11/07
Work done today
Charging
50%
.
31
Wed.11/29 09:00PM
Wed.11/29 09:00PM
Wed.11/29 09:00PM
Wed.11/29 09:00PM
1
2
Only for reference
CLICK!
EN
Input PIN Input PIN
PIN code
[ **** ]
OK
x4
00:00 Mon 11/07 00:00
Work done today Leaving house and
Charging starting blade
50% be careful!
General setting
General setting
Set date&time
Rain start delay
Language
APP Link
Time format
Define zones
Date format
Set time
1
1
2
2
23