Worx WR206E Owner's Manual page 21

Getting started
4. CONNECT CHARGING BASE TO AC
There are only a few more steps to go:
• Connect the charging base to the AC mains socket. (See Fig. 26)
• If everything is fine, the LED will light green.
• Open the cover of the battery enclosure and insert the PowerShare battery into the slot until it clicks. Then close the cover.
(See Fig. 27)
• Place Landroid Vision on charge by making sure a deep contact is established with the base. (See Fig. 28) The LED will blink
green; once the battery is fully charged, the LED will turn solid green.
• Let the battery get charged for a while. Whilst it is charging you may want to take a well-deserved break: get familiar with the
following instructions, and connect Landroid Vision to your Wi-Fi network.
26
28
Set date & time
General setting
Language
General setting General setting Set date & time Set date & time
Time format
Date(dd/mm/yy):
Date format
Language Language
Time(12h):
Set date & time
Time format Time format
Date(dd/mm/yy): Date(dd/mm/yy):
Set date & time
Set date & time Set date & time
2020/07/07
Date(dd/mm/yy): 2020/07/07
08:37 PM Time(12h): 08:37 PM
2020/07/07 2020/07/07 Date(dd/mm/yy): Date(dd/mm/yy): 2020/07/07 2020/07/07
27
Input PIN
Welcome
Input PIN Input PIN
Welcome Welcome
[ **** ]
Mon 11/07 00:00 Mon 11/07
Work done today
Mon 11/07 Mon 11/07 00:00 00:00 Mon 11/07 Mon 11/07
Charging
50%
Work done today Work done today Work done today
Charging Charging Charging
50% 50%
Wed.11/29 09:00PM
Wed.11/29 09:00PM
Wed.11/29 09:00PM Wed.11/29 09:00PM
Wed.11/29 09:00PM Wed.11/29 09:00PM
2
EN
CLICK!
CLICK! CLICK!
Input PIN
PIN code
[ **** ]
Input PIN Input PIN
OK
PIN code PIN code
[ **** ]
OK OK
x4
x4 x4
00:00 Mon 11/07 00:00
Leaving house and
Work done today Mon 11/07 Mon 11/07 00:00 00:00
00:00 00:00
Charging starting blade
50% be careful!
Leaving house and
Work done today Leaving house and
starting blade starting blade
Charging
50% 50% be careful! be careful!
General setting
Language
General setting General setting
Time format
Date format
Language Language
Set time
Time format
Time format
Date format Date format
Set time
1 Set time
1 1
2
2
21