Advertisement

Quick Links

Owner's manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L1300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Worx L1300

  • Page 1 Owner’s manual...
  • Page 2 MANUAL...
  • Page 3 Owner's manual Benutzerhandbuch Mode d’emploi Manuale d’uso Manual del propietario Gebruikershandleiding P104 Instrukcja obsługi P124 Návod k použití P144 Návod na použitie P164 Navodila za uporabo P184 Manual de utilizador P204 Felhasználói kézikönyv P224 Manual utilizator P244 Priručnik za upotrebu P264 Ejerens instruktionsbog P284...
  • Page 4 Users can view the electronic instructions at https://eu.worx.com/en/landroid/ vision-technology/. PRODUCT SAFETY GENERAL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine.
  • Page 5 deflectors, in place. b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. c) Never pick up or carry an appliance while the motor is running. d) Operate the disabling device from the appliance. - Before clearing a blockage;...
  • Page 6 g) Servicing of the appliance should be according to manufacturers’ instructions. h) In order to obtain the best performance, please pay attention to the following ambient temperature range, do not charge, use, or store in the case of exceeding the following temperature range: a) Charging temperature range: 4°C~45°C b) Discharge temperature range: -20°C~55°C...
  • Page 7 After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. k) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.
  • Page 9 Check with your local authorities or retailer for recycling advice. Class III appliance Read operator's manual Detachable supply unit Your Landroid Vision can be used with other Worx functional accessories. Visit https://eu.worx.com/en/ landroid/vision-technology/ to learn more about these available accessory options.
  • Page 10 COMPONENT LIST WHAT’S IN THE BOX The picture is only for reference Worx Landroid Vision Magnetic strip pegs Charging tower Power supply Charging base plate 20V battery Spare blades kits Magnetic strip Hex key Manuals Screws RFID...
  • Page 11 GETTING TO KNOW LANDROID VISION Cutting height adjustment Battery slot USB port Rain sensor Safety stop Interface Battery cover button High Pitched Alarm Slot Find My Landroid Camera Charge contact The picture is only for reference...
  • Page 12: Technical Data

    TECHNICAL DATA Type WR206E WR208E WR213E WR216E (200-299 - designation of machinery, representative of Robotic lawn mower with Vision technology) WR206E WR208E WR213E WR216E No load speed (/min) 2800 /min 2600 /min 2200 /min Cutting area (m 600 m 800 m 1300 m 1600 m Cutting diameter (cm)
  • Page 13: Noise Data

    NOISE DATA WR206E WR208E WR213E WR216E = 46.45 dB(A) = 46.46 dB(A) = 46.73 dB(A) A weighted sound pressure = 1.58 dB(A) = 1.11 dB(A) = 1.68 dB(A) = 57.45 dB(A) = 57.46 dB(A) = 57.73 dB(A) A weighted sound power = 1.58 dB(A) = 1.11 dB(A) = 1.68 dB(A)
  • Page 14: Maintenance

    MAINTENANCE Your Landroid Vision, works hard and needs to be cleaned and checked from time to time. This section of our guide helps you keep Landroid Vision in good shape so it can last for years without trouble. Here’s how to take care of your Landroid Vision. Switch off the machine before carrying out any service or maintenance.
  • Page 15 Vision successfully charges each time. 3. Keep it charged The heart of Landroid Vision is its 20V Li-Ion Worx Powershare Battery. A. For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place.
  • Page 16 A. If your Landroid Vision is not connected to your Wi-Fi network, you can still update it to the latest software version with a USB stick. B. Regularly visit the Worx Landroid Vision website to check if any new version is available. If you subscribed to Landroid Vision email list, you will be notified when a new version is available.
  • Page 17: Operation Messages

    OPERATION MESSAGES MESSAGE LANDROID VISION ACTION Cutting grass Cutting grass according to the mowing schedule. The rain sensor detects water. Landroid Vision will return to the charging base and stay there for the time you have programmed it to do so. When dry, Landroid Vision will auto- Raining matically begin the rain delay countdown and then return to mow.
  • Page 18 MESSAGE CAUSE ACTION WRONG PIN! Please PIN code is wrong. Input the correct PIN or re-set your PIN. retry. Turn power off. Turn Landroid Vision upside down and check if there’s anything preven- Blade disc is blocked by an ting the blade disc from rotating and remove any obstruction. object, e.g.
  • Page 19: Troubleshooting

    MESSAGE CAUSE ACTION With the “Lock Function” enabled, if your Landroid Vision does not receive a signal from your Wi-Fi router for 3 days, then it gets locked Please reconnect Landroid Vision to the Wi-Fi networtk it has been origi- Mower locked! as a security measure.
  • Page 20 SYMPTOM CAUSE SOLUTION Landroid Vision does not work enough hours per day to cut the Try adding more hours to the mowing schedule. grass. Mowing area is too big for the Try decreasing the size of the mowing area or increasing working size of Landroid Vision you have.
  • Page 21 SYMPTOM CAUSE SOLUTION Environmental influences. Restart Landroid Vision. Landroid Vision cannot Poor connection caused by Clean the contact pins located on the charging pile and the char- correctly dock with the debris on the charging strip. ging strip on Landroid Vision using a cloth. charging pile.
  • Page 22 SYMPTOM CAUSE SOLUTION Make sure your router is 2.4GHz or 5GHz. If your router has two settings, please enable the 2.4GHz or 5GHz band. Make sure your router is set to 802.11 mode and wireless setting is b/g/n mixed. Make sure your router has the SSID Broadcast function enabled when you connect the machine with the app.
  • Page 23: Declaration Of Conformity

    DECLARATION OF CONFORMITY Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany On behalf of Positec declare that the product Description Robotic Lawnmower Type WR206E WR208E WR213E WR216E(200-299 - designation of machinery, representative of Robotic lawn mower with Vision technology) (Serial number is placed on the back page) with battery charger WA3750.1 / WA3755.1 / WA3775 / WA3776 / WA3796 / WA3798 and charging base WA0515 Function Cutting grass...

This manual is also suitable for:

Wr206eWr208eWr213eWr216e

Table of Contents