XROCKER Cerberus Ottoman Gaming Bed Assembly Instruction Manual page 6

Step 7
F
6x
30mm M4 Screw
To install Bed Foot:
- Left / Right, 30mm from the side ( As per arrow shows )
- Middle, keep at middle point of Headboard / Footboard. ( As per arrow shows )
Middle
Step 8
G
1x
Spanner
3
13
3
30mm
30mm
Secure the pneumatic lifting mechanisms on
the side rail (3) into place by using flange nuts
as shown.
Do not over tighten the nuts as this will stop
the pneumatic arm rotating freely and could
damage the mounting.
Page 6 of 7