Download Print this page

ICP DAS USA I-7530 Quick Start Manual page 7

Hide thumbs Also See for I-7530:

3.2 Please refer to steps 2.2 and 2.3, connect the COM port of PC to

the I-7530, and execute VxCAN Utility to search for the I-7530

module. After searching done, the I-7530 will be list in the left

window of VxCAN Utility.

3.3 Click the CAN port of the I-7530 to set the CAN parameters of the

I-7530.

Check the "Active Port" and Click "Confirm" button to enable the

CAN port of the I-7530. The CAN parameters set here will not be

stored in to the I-7530. If users would like to configure the other

parameters, please refer to Chapter 2 "Set Parameters of I-7530",

and setting in the configuration mode of I-7530.

I-7530-g